Easily identify your Brush model in a few simple steps!
1. What type of brush is it?
3. How deep does it need to go to touch clutch?
3. How deep does it need to go to touch clutch?
There are generally 2 different makes of telescopic brushes. Stromag and ZF.
They can be interchanged and there are some exceptions and variations.
3. How deep does it need to go to touch clutch?
3. How deep does it need to go to touch clutch?
3. How deep does it need to go to touch clutch?
This tells us how long the brush needs to be in order to reach the slip ring (commutator) on the clutch. You measure from the bottom side of hex nut, to the tip of the brush, pushed as far as it goes in.
2. What diameter are threads?
3. How deep does it need to go to touch clutch?
2. What diameter are threads?
There are only 3 thread diameters that are measured just below the hex nut:
14mm, 16mm, or 18mm
4. Is it in oil (wet) or dry?
4. Is it in oil (wet) or dry?
2. What diameter are threads?
Most telescopic brushes run in oil or have an oil feed right near the point of contact with clutch. Very few have graphite tips and are for clutches that do not run in oil.
5. Other differences?
4. Is it in oil (wet) or dry?
5. Other differences?
Some telescopic brushes require extension tubes to reach the clutch. They are measured exactly the same way as those without extension; bottom of hex nut to tip of brush pushed all the way in.
6. Solution review
4. Is it in oil (wet) or dry?
5. Other differences?
- Brush Type: Stromag or ZF?
- 14mm, 16mm, or 18mm?
- Insertion Depth
- Wet (oil) or Dry (graphite tip)
- Extension Tube: yes or no?
*****ORDER NOW!***** 1(800)998-7078
*****ORDER NOW!***** 1(800)998-7078
*****ORDER NOW!***** 1(800)998-7078
We have most models
IN STOCK & ready to ship directly to you, as quickly as OVERNIGHT!
JUST ABOUT ANYWHERE IN USA & CANADA!
CALL, EMAIL OR TEXT NOW
IF YOU HAVE ANY QUESTIONS AT ALL OR FOR A FREE ESTIMATE!
*****ATTENTION*****
*****ORDER NOW!***** 1(800)998-7078
*****ORDER NOW!***** 1(800)998-7078
ACCEPT NO OTHER SUBSTITUTES!
BE ESPECIALLY AWARE OF....
cheap, 3-D printed, one piece, brownish coloured, FAKES!
They are known to break causing serious mechanical and electrical damage to main components, and premature wear, leading to
extended downtimes.
TRUST ONLY
THE #1 ORIGINAL ClutchBrush.com
BEWARE OF "ME TOO" COPYCAT SITES using the plural form of our Original Incorporated TM Company Name.
